Hitec HS-65MG Metal Gear Micro Servo
[HS-65MG]

Hitec HS-65MG Metal Gear Micro Servo

Best match for controlling the CCPM  for your 300/450 class EP helicopters and small scale airplanes!!

HS-65MG Servo Features:

HS-65MG servo has long lasting and durable metal gears and is Hitec’s most powerful servo in the micro class, with over 30 oz/in of power at 6 volts. The HS-65MG was created for higher performance micro helicopters, electric park flyers, & 1/18 scale cars, and features a top ball-bearing for long life and positive centering.

Servo Specifications:
Control System: +Pulse Width Control 1500usec Neutral
Required Pulse: 3-5 Volt Peak to Peak Square Wave
Operating Voltage: 4.8-6.0 Volts
Operating Temperature Range: -20 to +60 Degree C
Operating Speed (4.8V): 0.14sec/60° at no load
Operating Speed (6.0V): 0.11sec/60° at no load
Stall Torque (4.8V): 25 oz/in. (1.8kg.cm)
Stall Torque (6.0V): 31 oz/in. (2.2kg.cm)
Operating Angle: 45 Deg. one side pulse traveling 400usec
360 Modifiable: No
Direction: Clockwise/Pulse Traveling 1500 to 1900usec
Current Drain (4.8V): 5.3mA/idle and 400mA no load operating
Current Drain (6.0V): 6.6mA/idle and 500mA no load operating
Dead Band Width: 4usec
Motor Type: 3-Pole Neodynium Magnet
Potentiometer Drive: Indirect Drive
Bearing Type: Top Ball Bearing
Gear Type: Karbonite Gears
Connector Wire Length: 6" (150mm)
Dimensions: 0.92" x 0.45"x 0.94" (23.6 x 11.6 x 24mm)
Weight: .39oz. (11.2g)

This servo can operate 180° when given a pulse signal ranging from 600usec to 2400usec.

Package Included:

• 1 x Hitec HS-65MG Micro Servo
• 1 x M1.7x7 servo mounting screws
• 1 x Two-sided servo horn
• 1 x One-sided servo horn
• 1 x M1.7x3 servo horn screw
• 1 x Four-sided servo horn
• 1 x Instruction Sheet

Stock/Manufacturer # 32065S