Futaba R6014HS 2.4G 14-channels Receiver w/ High Speed Mode NEW!
R6014HS is a new TOP model 2.4Ghz Receiver from Futaba. It could be operated in Normal Mode or High Speed mode. The Normal Mode accepts any type of servos or the peripherals as the frame rate of the output is 14ms. The High Speed Mode accept the digital servos for outputs from 1ch to 6 ch, including BLS Series, and most peripheral equipments such as the gyro or brushless ESCs. The frame rate of the outputs is 7ms. The R6014HS is comptaible with the Fasst Transmitters with TM8 ( on 8Ch mode), TM10 (on 10Ch Mode), TM14 (on multi-ch mode)
- Offers G3 2048 resolution plus FASST benefits including Dual Antenna Diversity and significantly reduced latency for lightning-quick response
- High-speed operation takes advantage of digital servos’ ability to update more rapidly than analog servos (both can be used with this receiver)
- HS (High Speed) mode improves frame rate on channels 1-6 to only 7 milliseconds — compared to 14 milliseconds at normal mode.*
* Note: In HS mode, digital servos (including those in the BLS series) must be used on channels 1-6. Those channels will also operate gyros and brushless ESCs. Channels 7, 8, 9, 10, 11 and 12 continue at normal mode and accept any servos.
R6014HS Receiver Specifications:
Receiver Frequency: 2.4GHz bands
Channels: 14
High Speed Mode: 1-6 channels support high speed digital servos (possible to mix with normal servos)
Length: 2.06" (52.3mm)
Height: 0.63" (16.0mm)
Width: 1.48" (37.5mm)
Weight: 0.72oz (20.8g)
Current Drain: 700mAh
Power Requirement: 4.8 - 6V NiCd battery or regulated output from ESC
Stock # FUTL7639
|
Special Offer! 
