Futaba FF10C 2.4GHz 10ch Transmitter & R1410DP 10ch Receiver w/ Tx & Rx Batteries
You may control your airplanes, helis and gliders all with this single FM/PCM radio system! You may also upgrade to use 2.4Ghz FASST radio system later!
The software is available in six languages: German, English, French, Italian, Spanish and Dutch.
The radio system that offers the impossible: Pro-level features at a sport-system price.
The 10C is one of today's biggest bargains in flight systems—and now, it's available in 35Mhz, 40Mz and 72MHz versions. Dial n' Key™ programming provides easy access to 15-model memory and incredible setup versatility. Switches and functions are assignable. There's a total of 22 programmable mixes, plus twelve factory-defined mixes for sailplanes alone. You can set up 7-point throttle curves for airplanes and helis and switch conditions in mid-air.
System Overview
|
Specifications
|
- Big, 160 x 72 LCD with backlighting, adjustable contrast & auto-off
- Dial ‘n Key™ programming w/joystick navigation
- 15-Model memory (expandable w/optional CamPACs)
- 10-character user name
- 10-character model name
- 2048 resolution in FASST 10-channel mode
- Basic & Advanced menus
- Enhanced airplane, heli & glider software
- Smart Switch Technology™ (SST) — Logic Switches allow you to activate a function when specified switch and/or stick positions occur
- Up/down on/off timer (activate by stick or switch)
- Tracks service hours for radio and models
- Mode 1-4 selectable (Modes 3 & 4 programmable)
- Assignable functions/switches
- Auxiliary channel screen — for 1-step function/switch assignment & eliminating unused auxiliary functions
- 2 proportional slider switches
- Digital trims on all 4 main channels
- Trim memory & sub-trims (all channels)
- Adjustable trim steps (1-40)
- Fail-safe, servo reversing & EPA
- “Full Functionality” trainer system (cord required)
- Flap switch (3-position)
- Retract switch
- Rotary Dial (3)
- Adjustable Throttle Cut/Idle Down
- Sticks w/length & tension adjustments
- Servo cycle w/bar graph displays
- Constant trim, voltage, name and timer display
- CE Certified
Enhanced Features:
- Slider Switches
- Rotary Dials
- More Programmable Mixes
- More Factory-Defined Mixes
- R1410DP Receiver
- TP Transmitter Module
|
Advanced Airplane Menu
- 8 Programmable Mixes (4 linear/ (4) w/5-point curves)
- 9 Factory-Defined Mixes: Elevator-Flap; Ailvator (for dual elevator servos); Throttle-Needle; Aileron Differential; Flaperon; V-Tail; Elevon; Snap Roll; and Air Brake w/elevator delay
- Dual/Triple rates (4 ch.)
- Exponential (4 ch.)
- Idle down
- Throttle cut
- Throttle delay
- Throttle Hold & Idle-up w/delay
- 2 independent gyro settings
- 7-point throttle curve
- Flap trim
Advanced Heli Menu
The 10C accepts separate gyro sensitivity, governor speed and servo travel rates for up to 4 flight modes — and automatically changes all three when the flight mode changes.
- 6 Programmable Mixes (4 linear/ (2) 5-point curves)
- 8 Factory-Defined Mixes: Hover-Throttle; Hover-Pitch; Throttle-Needle; Governor; Offset; Revo (5-pt.); Delay; and Throttle Mix (ail/ele/rdr)
- Gyro menu
- 8 swash plate types w/graphics
- Swash Plate AFR
- 7-point throttle curves and (5) (including throttle hold) 7-point pitch curves
- Adjustable High/Low pitch setting
- 3 Adjustable Idle-up conditions
Advanced Glider Menu
- 8 Programmable Mixes (4 linear/ 5-point curves)
- 12 Factory-Defined Mixes: Butterfly-Elevator; Elevator-Flap; Chamber Mix (w/ail/ele/rdr adj.); Aileron-Flap; Aileron-Rudder; Flaperon; V-Tail; Flap Trim; Butterfly w/spoiler adj; and 4-point Offset (w/camber adj. for basic/launch/thermal/speed)
- Adjustable spoiler
- Adjustable Throttle Cut
- Single/Dual Aileron and Flap Servo Selections
- Start, Speed, Distance & Landing conditions, Adjustable Airbrake Activation
- Adjustable Motor Cut
|
Combo Includes:
- T10CHP or T10CAP Transmitter
- R1410DP 10ch PCM Receiver
- TM RF Module (5-pin)
- Wall Charger FBC-18C(4) or compatible charger (230V EU plug. We can also provide the 110V US/JP charger on request, usually take 3-5 days)
- 700mAh Transmitter Battery NT8S700B
- 1000mAh Receiver NiCD Rechargable Battery NR-4RB
- On/Off Switch Harness, FUTM4385
Specification for Transmitter T10C:
Operating System: 2-Stick, 10-channel, PCM1024 or FASST-2.4G System
Modulation: 2.4G-10ch (default), 2.4G-7ch / FM(PPM) or PCM Switchable
Power supply: 9.6V, NT8S700B included
Standard Wall Charger:
Input: 220V AC 50Hz 7W (default)
or input: 120V AC 60Hz 7W (by request)
Output: TX 9.6VDC 70mA
RX 4.8VDC 100mA
Stock #FUTJ9150, FUTJ9151
Note:
Subject to availability, we will refund you the total charge + shipping if we cannot ship out this product to you in 7 days.
This product is CE certified. NO SERVO is bundled with this combo.
This product must be shipped with INSURED AirParcel or EMS (Free upgrade to DHL for most EU regions), please select EMS when you checkout if you are not sure whether your region supports insured airparcel or not. You may also contact us to confirm before you place the order. Safe packing weight: 3KG, you may ship it together with other products.
10CAP and 10CHP are interchangeable, please write in the comment during checkout if you want to specify the model.
Our 2.4Ghz Futaba transmitters & receivers are globally compatible. That means they can be linked with any 2.4Ghz Futaba transmitter or receiver sold in other regions. (e.g. our transmitter with US receiver)
Our Futaba products are directly manufactured by Futaba Corporation (双葉電子工業株式会社). RC711 is not the affiliate of Hobbico, Inc in the United States.
|
Special CNY Pak 2012! 
