Expert Built Service! ALIGN T-Rex 450 SPORT V2 Super Combo + 2.4Ghz Futaba 6J/6EX/7C/8FG/10C or JR XG7/XG8/DSX9 Transmitter & Receiver RTF Combo with Aluminum Case
(for Beginner+)
Fully Setup by One of the Hong Kong's Champion Pilot!
Ready-to-Fly with 3 Flying Modes: Beginner, Mid-3D and Hard-3D!
Come with 2.4G Radio System of Your Choice + RAIDEN 2250mAh Li-Po + Balance Charger + 3DPro AluSafe Aluminum Case for 450 Helicopter.
What is RC711's Expert Build Service?
Very different from other assembled RTF set, our Expert Build Service (E.B.S.) will send your helicopter to the expert team who consists of the several champion pilots of Hong Kong's F3D R/C helicopter competition. The expert team will setup your helicopter in 3 modes: Beginner, Mid-3D and Hard-3D which you can choose from the soft menu of your transmitter. This provides an upgrade path for you to learn and practice your flying skills in different stages. Your helicopter will be fully tested outdoor to make sure all modes are properly setup, 100% ready to fly and the build time will be about 1.5 week per helicopter.
The Most Reliable Futaba Radios...
With the all new 2.4Ghz Futaba and JR radio systems, you can have more comprehensive setup for your helicopter from normal beginner flying to extreme 3D flying. You won't waste the Futaba/JR transmitter because you can use it later when you upgrade your helicopter to all other popular models. You can even use it on airplanes!
3 Different Flying Modes for Different Levels:
Our 3D Master uses the idle switch functon on the transmitter to pre-define the 3 different flying modes for your helicopter. This make the helicopter ready for all types of pilots, no matter if you are beginner, intermediate or pros! You can change between different fly modes during a single flight without the need to land the helicopters.
- Beginner (normal) – Normal hovering and fly around. Good for beginner to learn and practice.
- Mid-3D (idle1) – Performance flight. Fly around, 3D fly and invert fly. The next step for intermediate pilots.
- Hard-3D (idle2) – Extreme performance. Super reactive 3D fly. Ready for competition!
*Futaba 6EX transmitter only support 2 modes - normal and idle.
Preface:
●T-Rex 450 has always been the most ideal beginner or general practicing model. Even though flybarless models have been the predominant trend, Align has not forgotten those who prefer the traditional flybar helicopters. As a result, the T-Rex 450 Sport V2 has been introduced. It is not a minor revision of the previous model, but rather a new model incorporating numerous modern design concepts. Compared to its predecessor, the Sport V2 is more precise, with better flight characteristic and controllability.
●With the new style CNC rotor head system anodized in familiar blue anodizing, the flight stability and controllability is dramatically improved. The traditional 4 pieces frames is retained, with composite material technology which integrates screw attachment points for servo mounts to ease installation. Power is provided by Align’s high efficiency 450MX series motor, as if the helicopter received an ultra strong heart transplant. A newly designed rudder servo mount which relocates the servo inside the frame to achieve centralized CG and improve 3D performance, at the same time protects the servo from crash damage. Brand new battery mount with integrated ESC mount to tidy up the install.
●The totally revised T-Rex 450 Sport V2 offers changes more than surface deep; the superior flight stability, smooth maneuver response, excellent control feel, and the convenience of small form factor, all make this the definite model for training.
Features:
●New style CNC alloy rotor head system dramatically improve aesthetics. The new rotor head also improves flight stability and controllability.
●Newly designed 4 piece upper/lower plate frame system, with composite material technology which integrate screw attachment points for servo mounts to ease installation.
●Narrow lower frame and base plate design to increase rigidity and improve flight maneuver agility.
●A newly designed rudder servo mount which relocates the servo inside the frame to achieve centralized CG and improve 3D performance, at the same time protects the servo from crash damage.
●Equipped with MX series high efficiency brushless motor. Heatsink style shell with integrated cooling fan system dramatically improve cooling and improve power output.
●Dedicated rudder gyro mounting platform to isolate gyro from tail drive system vibration.
●Brand new battery mount with integrated ESC mount to tidy up the install.
●High precision tail gearbox and pitch control assembly to achieve visual aesthetic and function. Weighted tail blade grips to improve pitch change smoothness.
●New style aerodynamic airbrushed canopy.
Users must have a certain concept of security to operate the R/C helicopters.
Be sure to read and comply with related safety notes of instruction manual before flying.
Specifications:
●Length: 643mm
●Height: 230mm
●Main Rotor Diameter: 715mm
●Tail Rotor Diameter: 158mm
●Motor Drive Gear: 15T
●Main Drive Gear: 150T
●Autorotation Tail Drive Gear: 106T
●Tail Drive Gear: 25T
●Drive Gear Ratio: 1:10:4.24
●Weight(with motor): 540g
Align 450 Super Combo Package Included:
●T-REX 450 SPORT V2 RTF Kit X1
●325D Carbon blades X1set (installed)
●RCE-BL35P 35A Brushless ESC X1 (installed)
●450MX Brushless motor X1 (installed) New!
●DS410M (Metal Gear)Digital servoX3 (installed)
●GP780 Head lock gyroX1 (installed)
●DS420 Digital servoX1 (installed)
●Extra! RAIDEN 2400mAh 28C Li-Po battery (RD11-24A28)
●Extra! 3DPro AluSafe® Portable Aluminium Case for 450-class (3DP-AS450)
●Extra! iMAX Compact Charger B3 for Li-Polymer Battery (IMAXRC-B3)
Futaba or JR or HiTec Radio Combo Included:
●2.4Ghz Futaba T6J or T6EX or T7C or T8FG or T10CG Transmitter or JR XG7 or XG8 or DSX9 or HiTec Aurora
●2.4Ghz Futaba R2006GS or R617FS or R6208SB or R6014HS Receiver / JR RG831B or RD921 Receiver or HiTec Optima
●Rechargable Battey for Transmitter (not included for T6J)
●220V Charger for Transmitter Battery Only. (100V-240V for JR XG8, DSX9 & HiTec Aurora, not included for T6J)
●English Instruction Manual
●Other Accessories (different for each radio model)
| Focus Shot1:Newly designed main rotor head assembly |
Focus Shot2:Brand new battery mount with integrated ESC mount |
Focus Shot3:Newly designed metal main shaft bearing block and servo mount |
|
|
|
|
| Focus Shot4:Newly designed 4 piece upper/lower plate frame system |
Focus Shot5:Newly designed rudder servo mount |
Focus Shot6:Dedicated rudder gyro mounting platform |
|
|
|
|
| Focus Shot7:Centripetal forces balance tail rotor holder |
Focus Shot8:Hoop style horizontal fin mount with longer tail boom supports |
Focus Shot9:Newly designed landing skid for 450Sport V2 & 450Sport |
|
|
|
|
| Focus Shot10(Fiberglass painted canopy) |
Focus Shot11(325D Carbon blades) |
Focus Shot12(450MX brushless motor) |
|
|
|
|
| Focus Shot13(RCE-BL35P 35A Brushless ESC) |
Focus Shot14(DS410M Digital metal gear servo) |
Focus Shot15(DS420 Digital gear servo and GP780 head lock gyro) |
|
|
|
|
Note:
- The E.B.S.'s lead time is about 1.5 weeks. The order will be shipped out 1.5 weeks after order placed and payment received.
- Please check with us for the availability of the radio model before order. Usually Futaba radios are available all the time.
|
Helicopters 
