|
Expert Built Service! ALIGN T-Rex 450 PRO V2 Super Combo + 2.4Ghz Futaba 6J/6EX/7C/8FG/10C or JR XG7/XG8/DSX9 or HiTec Aurora Transmitter & Receiver RTF Combo with Aluminum Case
(for Beginner+)
Fully Setup by One of the Hong Kong's Champion Pilot!
Ready-to-Fly with 3 Flying Modes: Beginner, Mid-3D and Hard-3D!
Come with 2.4G Radio System or Receiver of Your Choice + RAIDEN 2250mAh Li-Po + Balance Charger + 3DPro AluSafe Aluminum Case for 450 Helicopter.
What is RC711's Expert Build Service?
Very different from other assembled RTF set, our Expert Build Service (E.B.S.) will send your helicopter to the expert team who consists of the several champion pilots of Hong Kong's F3D R/C helicopter competition. The expert team will setup your helicopter in 3 modes: Beginner, Mid-3D and Hard-3D which you can choose from the soft menu of your transmitter. This provides an upgrade path for you to learn and practice your flying skills in different stages. Your helicopter will be fully tested outdoor to make sure all modes are properly setup, 100% ready to fly and the build time will be about 1.5 week per helicopter.
The Most Reliable Futaba/JR/HiTec Radios...
With the all new 2.4Ghz Futaba, JR or HiTec radio systems, you can have more comprehensive setup for your helicopter from normal beginner flying to extreme 3D flying. You won't waste the Futaba/JR transmitter because you can use it later when you upgrade your helicopter to all other popular models. You can even use it on airplanes!
3 Different Flying Modes for Different Levels:
Our 3D Master uses the idle switch functon on the transmitter to pre-define the 3 different flying modes for your helicopter. This make the helicopter ready for all types of pilots, no matter if you are beginner, intermediate or pros! You can change between different fly modes during a single flight without the need to land the helicopters.
- Beginner (normal) – Normal hovering and fly around. Good for beginner to learn and practice.
- Mid-3D (idle1) – Performance flight. Fly around, 3D fly and invert fly. The next step for intermediate pilots.
- Hard-3D (idle2) – Extreme performance. Super reactive 3D fly. Ready for competition!
*Futaba 6EX transmitter only support 2 modes 
Preface:
●T-Rex 450 Pro V2 is a newly revised flybared helicopter model. The first sight of T-Rex 450 PRO V2 will surely leave a lasting impression of its attractive designs. The aerodynamic canopy is the most noticeable feature of T-Rex 450 PRO V2. The rotor head is precision made with CNC aluminum alloy for higher mechanical rigidity, contributing to optimal flight stability and aerobatic agility.
●Custom designed side frame allows for ease of electronics install and wire routing, while improving exterior aesthetics at the same time. Utilizes Align’s latest 450MX motor with built in cooling fan, effectively reducing heat while improving power output.
●450 size is the most ideal practice heli for beginners and seasoned pilots alike. With beautiful aesthetics and superior performance, the T-Rex 450 Pro V2 is your obvious choice.
Features:
●Newly designed head block with high rigidity and stability.
●Single piece integrated design of main bearing block and servo mount.
●Single piece integrated design of anti-rotation guide and gyro mount.
●Single piece integrated landing gear.
●Highly stable flybar control system.
●High precision bearing mixing arms.
●Newly designed high resolution swashplate.
●Single piece battery mount with integrated canopy mount designed to bring CG closer to disk plane.
●Highly rigid frame with single piece carbon side and bottom plates.
●Highly efficient shaft driven tail design.
●Weighted tail rotor blade grips to repel centripetal forces.
●Straight-up in-frame rudder servo mount for improved geometry.
●Newly designed aerodynamic canopy.
●Newly designed high torque motor.
●Newly designed high strength main blade grips
Users must have a certain concept of security to operate the R/C helicopters.
Be sure to read and comply with related safety notes of instruction manual before flying.
Specifications:
●Length: 640mm
●Height: 230mm
●Main Rotor Diameter: 710mm
●Tail Rotor Diameter: 158mm
●Motor Drive Gear: 12T (helical)
●Main Drive Gear: 121T (slant thread)
●Autorotation Tail Drive Gear: 106T
●Tail Drive Gear: 25T
●Drive Gear Ratio: 1:10.08:4.24
●Weight(with motor): 550g
Package Included:
●Align T-REX 450 PRO V2 Set x 1 set (100% RTF with E.B.S)
●325D Carbon blades x 1set
●RCE-BL35P 35A Brushless ESC x 1 (Installed) NEW!
●450MX Brushless motor x 1 (Installed) NEW!
●DS410M (Metal Gear)Digital servo x 3 (Installed)
●GP790 Head lock gyro x 1 (Installed) NEW!
●DS520 Digital servo x 1 (Installed)
●Extra! RAIDEN 2400mAh 28C Li-Po battery (RD11-24A28)
●Extra! 3DPro AluSafe® Portable Aluminium Case for 450-class (3DP-AS450)
●Extra! iMAX Compact Charger B3 for Li-Polymer Battery (IMAXRC-B3)
Futaba or JR or HiTec Radio Combo Included:
●2.4Ghz Futaba T6J or T6EX or T7C or T8FG or T10CG Transmitter or JR XG7 or XG8 or DSX9 or HiTec Aurora
●2.4Ghz Futaba R2006GS or R617FS or R6208SB or R6014HS Receiver / JR RG831B or RD921 Receiver or HiTec Optima
●Rechargable Battey for Transmitter (not included for T6J)
●220V Charger for Transmitter Battery Only. (100V-240V for JR XG8, DSX9 & HiTec Aurora, not included for T6J)
●English Instruction Manual
●Other Accessories (different for each radio model)
| Focus Shot1(High precision main rotor assembly) |
Focus Shot2(High precision bearing mixing arms) |
Focus Shot3(Single piece battery mount with integrated canopy mount designed to bring CG closer to disk plane) |
|
|
|
|
| Focus Shot4(Single piece integrated design of anti-rotation guide and gyro mount) |
Focus Shot5(High precision main drive gear with dual cooling fan design patent) |
Focus Shot6(Highly rigid frame with single piece carbon side and bottom plates/1.2mm) |
|
|
|
|
| Focus Shot7(Straight-up in-frame rudder servo mount for improved geometry) |
Focus Shot8(Centripetal forces balance tail rotor holder) |
Focus Shot9(Single piece integrated landing gear) |
|
|
|
|
| Focus Shot10(Fiberglass painted canopy) |
Focus Shot11(450MX extended high torque brushless motor) |
Focus Shot12(325D Carbon blades) |
|
|
|
|
| Focus Shot13(DS410M Digital metal gear servo) |
Focus Shot14(DS520 Digital gear servo) |
Focus Shot15(GP790 head lock gyro) |
|
|
|
|
| Focus Shot16(RCE-BL35P 35A Brushless ESC) |
. |
. |
|
|
|
Note:
- The E.B.S.'s lead time is about 1.5 weeks. The order will be shipped out 1.5 weeks after order placed and payment received.
- Please check with us for the availability of the radio model before order. Usually Futaba radios are available all the time.
|
Helicopters 
