UN-A6 PLUS Charger Assistant Unit
[UNRC-A6PLUS/CAU]

UN-A6 PLUS Charger Assistant Unit
(maximum to charge 24 x 2S , 16 x 3S or 8 x 6S Li-Po batteries one by one)

Fearures:

• latest verison of the charger assistant unit for multiple Li-Po batteries to charge one by one.
• low resistance MOS resistors used to maximize the highest power output, support up to 5A current
• support charging of multiple Li-Po batteries at the same time: 24 x 2S batteries, 16 x 3S batteries or 8 x 6S batteries.
• built-in professional discharger allows discharge for each cell, thus balance the Li-Po battery.
• discharge voltage limitation can be set from 1.5V to 4.2V (0.01V stepping)
• LED showing the status of each set
• safefy stop feature allow the charger to automatically cut off the power in 5 secound in case of error/problem.

How to use:

• please connect the data cable from the UN-A6 PLUS to the in1 port of the unit. inout port connect to the charger's 6S output port. ports 1-8 is for the Li-Po batteries
• charging: after power on the UN-A6 PLUS charger, please set the charing mode to 02. Then it will automatically check the batteries and ready for charging.
• discharging: after power on the UN-A6 PLUS charger, please set the charing mode to 03. Then it will automatically check the batteries and ready for discharging. the discharge current is automatically adjusted by the charger, cannot set manually.
• protection mode: if in any situation that the charger cannot detect a working connection, it will start to count down for 5 secounds and cut off all operation afterward to protect the devices and all the batteries.

Warning: NEVER charge different types of battery at the same time!  e.g. DO NOT charge 3S and 6S Li-Po together.