SkyRC 4A 15V Universal Switching AC Adapter / Power Supply (High Loading)
[SK-200008]
Design for all balance chargers, high capacity and loading for 1-3S Li-Po or other battery types.
Good to use to charge the 1S, 2S and 3S Li-Po batteries for 100-450 class helicopters. e.g. 11.1V 500-2500mAh, 22.2V 1500mAh or below.
Specifications:
Input: AC 100-240V 50/60Hz 1.5A
Output: DC 15V 4A
Circuit power: 60W
LED indicator for power on
for SkyRC iMAX and other balance chargers with 12V-15V input
Q&A:
How to choose the correct power supply / ac adapter?
- to charge a 3S (11.1V) Li-Po with 1A current, the charger output is 3S x 1A = 3A. Then a power supply of 5A is required.
- to charge a 6S (22.2V) Li-Po with 2A current, the charger output is 6S x 2A =12A. Then a power supply of 20A is required.
- therefore a stronger power supply always allow you to charge the batteries faster!
How to choose the correct charger?
- if the maximum power of your charger is 100W, P= V x I:
- e.g. the full voltage of a 3S Li-Po is 12.6V (4.2V x 3S). If your charging rate is 3.5A, then charger power required is 12.6V x 3.5A = 44.10W
- e.g. the full voltage of a 6S Li-Po is 25.2V (4.2V x 6S). If your charging rate is 4A, then charger power required is 25.2V x 4A = 100.80W (failed!! over charger limit 100W, please reduce to 3.5A)
- therefore if you want to charge the battery faster at higher current ~5A, you will need to get a more powerful charger likes 200W+.
- always use 10% less than the maximum limit to avoid overload & overheat the charger, this can extend the life for your chargers too.
|
Special Offer! 
