|
ALIGN T-Rex 600 Nitro 3G Flybarless Combo w/ CarbonFibre Blades & Frame + Regulator + 3G Gyro System & DS620 + 3 x DS610 CCPM Servos
LIMITED STOCK! ALL NEW 3G FLYBARLESS T-REX 600 COMBO!
 Features:
●3-axis gyroscopic flybarless system to simulate the stability of mechanical flybar system, yet at the same time achieving agile 3D performance.
●Utilizes Silicon Micro Machine (SMM) sensors for excellent stability.
●12 bit processors providing ultra high resolution, resulting in highly precise controls
●Software upgradable through PC interface adapter
(sold eparately)
●Simplistic setup process without the need of external devices. Setup is done through 5 steps and 2 sensitivity adjustments. Rudder setup is identical to GP780 gyro, minimizing learning curve.
●Flybarless system dramatically improves 3D power output and efficiency, resulting in reduced fuel or electricity consumption.
●Highly sensitive gyroscopic sensors combined with advanced control detection routine providing higher hovering and aerobatic stability than other flybarless system.
●Suitable for all CCPM and mechanical mixing system.
●Comaptible with helicopter of all sizes from T-Rex 250 to T-Rex 700.
●Innovative Pitch Gau as an aid to facilitate pitch adjustments.
●High frame rate signal output for faster and higher precision servo response.
●Capable to operate between 3V to 8.4V, compatible with high voltage servos.
●Small footprint, light weight, minimalists and reliable design.
Features (T-Rex 600NFL):
1.Bump resistance fiberglass painted canopy. Canopy also features a rigid easy clip on/off design for fast installation and removal.
2.Simple andlight weight design provides awesome flight performance nearly equal to larger helicopters while still maintaining very stable hovering and flight.
3.+-15° collective pitch is possible for extreme 3D performance.
4.Clutch, Fan and Bell assembly provide a very smooth operation even at high RPM.
5.Forward mounted tail servo helps to keep exhaust oil from entering servo also improves the CG.
6.Pitch and All servos moved forward for CG.
7.Battery tray designed for easy and clean radio gear installation.
8.Fuel Tank Capacity 440cc for about 10 minutes 3D flying.
9.Main Gear Radio 8.5:1, 1500-2200 Rotor RPM.
10.Heavy duty tail with thrust bearings.
11.95mm Tail Blades.
12.Highly efficient shaft driven tail design.
13.Rigid frame design that can also handle hard crashes without damage.
14.Carbon Fiber frames, fins and boom supports.
15.Super engine cooling system features large diameter fan and very efficient airflow to provide unequaled cooling and horsepower.
16.Clutch/Start shaft feature a 10mm ID one way bearing to eliminate any bearing problems during starting and flight.
17.Ready to fly weight (no fuel) is an incredible 3.10Kg.
18.Fuel Tank designed so that no additional header tank is required.
19.New main gear with one-way bearing design for high torque.
20.New tail boom supports.
Specifications:
●Suitable Voltage Range:DC 3~8.4V
●Current Comsumption:<80mA @ 4.8V>
●Flip and Roll rate detection speed: :±300degrees/sec
●Rudder rate detection speed:±500degrees/sec
●Sensor resolution: 12bit
●Operating temperatur:-20℃~65℃
●Operating humidity:0%~95%
●RoHS certified
●Dimension:
Controlbox:42x26.5x14.5mm
Sensor:22.3x21.7x14mm
●Weight:
Control box:16g
Sensor:9g
Specifications (T-Rex 600NFL):
●Length:1160mm
●Height:410mm
●Main blade length:600mm
●Main rotor diameter:1350mm
●Tail rotor diameter:240mm
●Engine pinion gear:20T
●Autorotation tail drive gear:180T
●Drive gear ratio:8.5:1:4.5(E:M:T)
●Flying weight:Approx. 3100g
Package Included:
●T-REX 600N 3G kits set X1
●3G Programmable Flybarless System X1
●600D Carbon fiber blade X1
●DS610 Digital servo X3
●DS620 Digital servo X1
●2 In 1 voltage regulator combo X1
●RCE-G600 Governor X1
To Fly this helicopter, customer required to have:
●Transmitter(7-channel or more, helicopter system)
●Receiver(7-channel or more)
●Standard servoX1
●Align 50 engineX1
●50 MufflerX1
●Pitch gaugeX1
●Super starterX1
●Engine fuelX1
●Fuel pumpX1
| Focus Shot1(High precision metal main rotor assembly) |
Focus Shot2(High precision bearing mixing arms) |
Focus Shot3(New elevator arm set, high rigidity metal main shaft bearing block) |
|
|
|
|
| Focus Shot4(Metal canopy mounting bolt) |
Focus Shot5(Metal stabilizer belt set) |
Focus Shot6(Tail rotor assembly with double bearings and heavy duty tail with thrust bearings) |
|
|
|
|
| Focus Shot7(600D Carbon fiber blade) |
Focus Shot8(RCE-G600 Governor) |
Focus Shot9(2 In 1 voltage regulator combo) |
|
|
|
|
| Focus Shot10(DS610 Digital servo) |
Focus Shot11(DS620 Digital servo) |
Focus Shot12(3G Programmable Flybarless System) |
|
|
|
|
| Package1: |
|
|
| Package2: |
|
|
|
Helicopters 
