Expert Built Service! ALIGN T-Rex 550E 3GX Flybarless Super Combo V2 + 2.4Ghz Futaba/JR/Spektrum/Walkera Receiver Bind-n-Fly Combo with 22.2V 5300mAh 6S1P 35C Li-Po
(for Intermediate)
Fully Setup by One of the Hong Kong's Champion Pilot!
Ready-to-Fly with 3 Flying Modes: Beginner, Mid-3D and Hard-3D!
Come with 2.4G Futaba or JR Radio System of Your Choice + RAIDEN 22.2V 6S1P 5300mAh 35C Li-Po
What is RC711's Expert Build Service?
Very different from other assembled RTF set, our Expert Build Service (E.B.S.) will send your helicopter to the expert team who consists of the several champion pilots of Hong Kong's F3D R/C helicopter competition. The expert team will setup your helicopter in 3 modes: Beginner, Mid-3D and Hard-3D which you can choose from the soft menu of your transmitter. This provides an upgrade path for you to learn and practice your flying skills in different stages. Your helicopter will be fully tested outdoor to make sure all modes are properly setup, 100% ready to fly and the build time will be about 7 days to 1.5 week per helicopter.
What is BNF?
BNF stands for Bind-and-fly. That means that this combo includes a 100% fully setup helicopter with receiver installed, but no transmitter included because you can use your own 2.4Ghz transmitter to connect and fly it. This greatly save for you because you can buy the BNF combo cheaper, also no need to buy an extra transmitter which you don't need to.
What receiver should I choose?
AR6100E Receiver: If you have any Spektrum and JR PROPO DSM2 6-channel+ transmitter:
- Spektrum DSM2 and DSMX 2.4Ghz transmitters include: DX6, DX7, DX8, DX10, etc
- JR DSM2 2.4Ghz transmitters include: DSX7, DSX9, DSX11, DSX12, etc
RX-801 Receiver: If you have any Walkera Devention Devo 8 or above transmitter.
R2006GS Receiver: If you have any Futaba 6J or 8J FHSS/S-FHSS transmitter.
R617FS, R6203SB and R6208SB S.Bus Receiver: If you have any Futaba FASST 6-channel+ transmitter:
- Futaba FASST 2.4Ghz transmitters include: 6EX, 7C, 8FG, 10C, 12FG, 12Z, 14MZ,18MZ, FX20, FX30, etc
- R6203SB and R6208SB are ideal to connect with Align 3GX system with a single S.Bus cable
- Futaba 6EX 2.4G transmitter does NOT support the S.Bus protocol, so please only select R617FS or R6208SB receiver
** if you want to use other receiver models: Futaba, JR, HiTec, Spektrum, WFLY, etc. please feel free contact us at cs@rc711.com.
How can I Bind-n-Fly the helicopter?
The Align T-Rex 450 PRO 3GX V2 EBS RTF combo is not a factory made stock heli combo, it is pre-assembled by our 3D Master. Since every single part and electronic component on the helicopter has its own characteristics, the settings are different for each helicopter. Our expert will write down all the transmitter settings of your helicopter on a paper (yes, just one page), then what you need to do is to create a new model profile on your transmitter and input them. That's it!
Certainly, if you have any question during the setup process, you are feel free ot send question to us!
3 Different Flying Modes for Different Levels:
Our 3D Master uses the idle switch functon on the transmitter to pre-define the 3 different flying modes for your helicopter. This make the helicopter ready for all types of pilots, no matter if you are beginner, intermediate or pros! You can change between different fly modes during a single flight without the need to land the helicopters.
- Beginner (normal) – Normal hovering and fly around. Good for beginner to learn and practice.
- Mid-3D (idle1) – Performance flight. Fly around, 3D fly and invert fly. The next step for intermediate pilots.
- Hard-3D (idle2) – Extreme performance. Super reactive 3D fly. Ready for competition!
*Futaba 6EX transmitter only support 2 modes - normal and idle.
Features (T-Rex 550E V2):
1. Newly designed aerodynamically efficient metal main blade control system, with high rigidity and superior control precision.
2. New lightweight high precision main gear, with excellent balance and stability.
3.The most optimal motor pinion ratio and tail gear ratio to achieve the most efficient power output and flight characteristic .
4. New lightweight rigid metal main shaft bearing blocks.
5. Integrated swash anti-rotation guide and gyro mounting platform.
6.Brand new CNC machined metal tail gear box, with thicker side plates to increase rigidity. The more streamlined design also allows for simpler disassembly .
7. Dual section battery mount for optimal CG position based on battery weight.
8. 3K carbon fiber side frame and base plate, simple yet highly rigid for ease of maintenance.
9. High quality 5mm carbon rod and CNC metal tail scissor control arms are used in rudder control system to improve rudder lockingand control effectiveness.
10. Newly designed rear mounted rudder servo mount, for pleasing aesthetic as well as improving side frame strength and protection to the rudder servo.
11. High speed rated thrust bearings in tail blade grips.
12. High efficiency torque tube drive.
13. Additional radial bearing is added to the one way bearing block to ensure smooth rotation, and eliminate jammed one way bearing.
14. High strength carbon fiber used on tail fins and tail boom supports.
15. New lightweight landing gears.
16. High grade airbrushed fiberglass canopy.
Specifications:
● Length: 1042mm
● Height: 356mm
● Main Blade Length: 520mm
● Main Rotor Diameter: 1188mm
● Tail Rotor Diameter: 254mm
● Motor Drive Gear:16T
● Main Drive Gear:170T
● Autorotation Tail Drive Gear: 131T
● Tail Drive Gear: 34T
● Drive Gear Ratio: 1:10.62:3.85
● Weight(With Motor): 1800g
● Flying Weight: Approx. 2800g
Package Included:
●T-REX 550E V2 3GX Kits Set X 1
●Aluminum Tail Boom X 1 (Installed)
●RCE-BL70G Brushless ESC x 1 (Installed)
●520 Carbon fiber blades X 1 (Installed)
●DS610 Digital servo X 3 set (Installed)
●DS620 Digital servo X 1 (Installed)
●3GX Flybarless System X 1 set (Installed) NEW!
●600MX Brushless Motor X 1 (Installed) NEW!
●90mm 3K Carbon Fiber Tail Blades X 1 Set (Installed)
●Extra! RAIDEN 22.2V 6S1P 5300mAh 35C Li-Po battery (RD22-53A35)
●2.4Ghz Receiver of your choice (Installed)
| Focus Shot1(Newly designed aerodynamically efficient metal main blade control system) |
Focus Shot2(Dual section battery mount) |
Focus Shot3(CNC main drive gear set ) |
|
|
|
|
| Focus Shot4(New lightweight rigid metal main shaft bearing blocks/Integrated swash anti-rotation guide and gyro mounting platform) |
Focus Shot5(Rear mounted rudder servo mount) |
Focus Shot6(Brand new carbon tail control pushrod assembly) |
|
|
|
|
Focus Shot7(Brand new CNC machined metal tail gear box, with thicker side plates to increase
rigidity. The more streamlined design also allows for simpler disassembly ) |
Focus Shot8(Metal tail control arm with wearproof sleeve) |
Focus Shot9(M0.8 131T Autorotation Tail Drive Gear:34T Tail Gear) |
|
|
|
|
| Focus Shot10(600MX high efficiency, high torque brushless motor) |
Focus Shot11(520 carbon main blades) |
Focus Shot12(DS610 digital servos /DS6 servo horns.) |
|
|
|
|
| Focus Shot13(DS620 Digital servo/RCE-BL70G ESC) |
Focus Shot14(3GX Programmable Flybarless System) |
|
|
|
|
Note:
- The E.B.S.'s lead time is about 7 days to 1.5 weeks. The order will be shipped out 1.5 weeks after order placed and payment received.
- Please check with us for the availability of the radio model before order. Usually Futaba radios are available all the time.
- We will pack the RTF helicopter together with the radio into a hard paper box with a lot of protection. Since the size of the parcel is quite large, we do not offer free DHL upgrade for EMS order of this product.
- This RTF combo can be shipped with air parcel with XP-size. However some countries have restricted the parcel to P-size which is too small to contain the T-Rex 550E RTF. If you are not certain, please email us with your full shipping address. We will get back to you with the suggested shipping method ASAP.
- Balance charger is not included. For high capacity Li-Po battery, we suggest to use the intelligent multifunction charger - e.g. iMAX B5/B6, E605 and etc...
|
Helicopters 
