O.S. FSa-155-P Four Cycle Engine with Pump System for Airplane
Features:
- Ideal for 120 size scale and sport models and aerobatic models requiring stable power and linear throttle response
- PD-08 pump and 70R carburetor integrated with regulator ensures stable fuel delivery regardless of model attitude and fuel level
- F-6020 three piece design muffler with center heatsink
- New internal lubricating system eliminates breather tubing from the crankcase
Package Included:
FSa-155-P Four Cycle Engine with PD-08 Pump System
70R Carburetor F-6020 Muffler
Header Pipe
Type F Glow Plug
Needle Valve
Extension Cable
Instruction Manual
Specifications:
- Displacement: 1.548 cu in (25.36cc)
- Bore: 1.323" (33.6mm)
- Stroke: 1.126" (28.6mm)
- Practical RPM: 2,000 - 10,000 RPM
- Power Output: 2.6hp @ 10,000 RPM
- Engine Weight: 28.40 oz (805g)
- Muffler Weight: 3.35oz (95g)
- Carburetor Settings:
- Needle Valve: 2-1/2 - 3 turns from fully closed
- Mixture Control Valve: Factory set, make only small adjustments if needed, after adjusting needle valve as described in manual, turn 30° to lean idle mixture or 90° counterclockwise to richen mixture then back again 45° clockwise
- Width at Mounting Tabs: 2.6" 67mm)
- Crankcase Width below Mounting Tabs: 1.8" (47mm)
- Length from Drive Washer to rear of Carburetor: 5" (127.5mm)
- Height from Mounting Tab to Pushrod Cover: 4.5" (114mm)
- Height from bottom of Crankcase to Pushrod Cover: 5.4" (138.6mm)
- Distance between Mounting Hole Centers Same Side: 0.98" (25mm)
- Distance between Mounting Hole Centers Opposite Side: 2.3" (58mm)
- Distance/front Mounting Hole Center to Drive Washer: 2.5" (64.5mm)
- Distance/ Center of Engine to Drive Washer: 3.03" (77mm) Crankshaft Size: 5/16-24
Requires:
Glow fuel with 5-20% nitro content and no less than 18% lubricant content
Propeller: 16x8-12 or 17x8-12
Glow Starter
Field equipment
Code No. 35430
Note:
We have full range of O.S. products, if you cannot find your desired product(s) in our online store, please send request to [email protected].
|