O.S. FS-95V Ringed 4-Stroke Engine for Airplane
The FS-95V has the multi-cylinder look, deeper sound and 4-stroke power that will perfectly complement your next scale project!
- A bold new head design with individual valve covers and machined aluminum pushrod guides give the FS-95V a classic appearance.
- Larger displacement than the FS-91, but lighter in weight — yet the FS-95V mounts in the same bolt pattern.
- Delivers famous O.S. performance, with low amplitude sound that's ideal for scale planes
FEATURES:
- Broad power band for a wide variety of airplanes including models designed for .60 2-stroke and .90 4-stroke engines
- Redesigned cylinder head to match angled valve layout for steady power at all times and a perfect balance between high combustion and efficient cooling
- Redesigned "Jet Stream" muffler with unique shape for more authentic four stroke sound
- Same mounting dimensions, drive hub position and linkage position as the O.S. FS-91 Surpass II, 61FX, 65LA, 75AX, 95AX and FS-110
SIMPLE SPECIFICATIONS:
Stock Number: OSMG0900
Displacement: 0.95 cu in (15.59 cc)
Bore: 1.142 in (29 mm)
Stroke: 0.929" (23.8 mm)
Power Output: 1.7 @ 10,000 rpm
Practical RPM: 2,100-11,000
Engine Weight: 20.9 oz (592 g)
Muffler Weight: 2.1 oz (58 g)
INCLUDES:
O.S. Engines FS-95V Four Stroke Engine with Type F Glow Plug, Muffler Header Pipe with two Locknuts and Instruction Manual
REQUIRES:
Fuel: 5-20% nitromethane aircraft blend with 18% lubricant content Propeller: Sport & Aerobatic 13x7-9, 14x6-8 Scale 15x6-8
DETAIL SPECIFICATIONS:
- Carburetor Settings- Needle Valve: 2-1/2 - 3 turns from fully closed
- Mixture Control Valve: Rotate until slotted head is flush with carb body. After setting needle valve, rotate mixture control valve approximately 45° clockwise to lean the mixture or 45° counter- clockwise to richen mixture
- Displacement: 0.951cu in (15.59cc)
- Bore: 1.142" (29.0mm)
- Stroke: 0.929" (23.8mm)
- Practical RPM: 2,100 - 11,000RPM
- Power Output: 1.7ps/10,000RPM
- Weight: 20.88oz (592g)
- Muffler Weight: 2.05oz (58g)
- Crankshaft Size: 5/16-24
- Height from bottom of Mounting Tab to Pushrod Cover: 3.8" (97.5mm)
- Height from bottom of Crankcase to Pushrod Cover: 4.7" (119mm)
- Distance from Carburetor to Drive Hub: 4.5" (115.7mm)
- Distance/Mounting Hole Centers Same Side: 0.98" (25mm)
- Distance/Mounting Hole Centers Opposite Side: 2" (52mm)
- Mounting Hole Diameter: 0.16" (4.2mm)
- Distance from Drive Hub to end of Crankshaft: 1.5" (37.4mm)
- Distance from Drive Hub to center of Engine: 2.6" (66.5mm)
- Width at Mounting Tabs: 2.4" (61mm)
- Width Below Mounting Tabs: 1.7" (42.6mm)
- Height/Mounting Tab Bottom to center of Needle Valve: 0.70" (17.8mm)
|
Helicopters 
