Expert Built Service! ALIGN T-Rex 550E 3GX Flybarless Super Combo V2 + 2.4Ghz Futaba 6J/6EX/7C/8FG/10C or JR XG7/XG8/DSX9 Transmitter & Receiver RTF Combo with 22.2V 5300mAh 6S1P 35C Li-Po
(for Intermediate)
Fully Setup by One of the Hong Kong's Champion Pilot, Mr Sunny Wong!
Ready-to-Fly with 3 Flying Modes: Beginner, Mid-3D and Hard-3D!
Come with 2.4G Futaba or JR Radio System of Your Choice + RAIDEN 22.2V 6S1P 5300mAh 35C Li-Po
What is RC711's Expert Build Service?
Very different from other assembled RTF set, our Expert Build Service (E.B.S.) will send your helicopter to the expert team who consists of the several champion pilots of Hong Kong's F3D R/C helicopter competition. The expert team will setup your helicopter in 3 modes: Beginner, Mid-3D and Hard-3D which you can choose from the soft menu of your transmitter. This provides an upgrade path for you to learn and practice your flying skills in different stages. Your helicopter will be fully tested outdoor to make sure all modes are properly setup, 100% ready to fly and the build time will be about 7 days to 1.5 week per helicopter.
The Most Reliable Futaba Radios...
With the all new 2.4Ghz Futaba and JR radio systems, you can have more comprehensive setup for your helicopter from normal beginner flying to extreme 3D flying. You won't waste the Futaba/JR transmitter because you can use it later when you upgrade your helicopter to all other popular models. You can even use it on airplanes!
3 Different Flying Modes for Different Levels:
Our 3D Master uses the idle switch functon on the transmitter to pre-define the 3 different flying modes for your helicopter. This make the helicopter ready for all types of pilots, no matter if you are beginner, intermediate or pros! You can change between different fly modes during a single flight without the need to land the helicopters.
- Beginner (normal) – Normal hovering and fly around. Good for beginner to learn and practice.
- Mid-3D (idle1) – Performance flight. Fly around, 3D fly and invert fly. The next step for intermediate pilots.
- Hard-3D (idle2) – Extreme performance. Super reactive 3D fly. Ready for competition!
*Futaba 6EX transmitter only support 2 modes - normal and idle.
Features (T-Rex 550E V2):
1. Newly designed aerodynamically efficient metal main blade control system, with high rigidity and superior control precision.
2. New lightweight high precision main gear, with excellent balance and stability.
3.The most optimal motor pinion ratio and tail gear ratio to achieve the most efficient power output and flight characteristic .
4. New lightweight rigid metal main shaft bearing blocks.
5. Integrated swash anti-rotation guide and gyro mounting platform.
6.Brand new CNC machined metal tail gear box, with thicker side plates to increase rigidity. The more streamlined design also allows for simpler disassembly .
7. Dual section battery mount for optimal CG position based on battery weight.
8. 3K carbon fiber side frame and base plate, simple yet highly rigid for ease of maintenance.
9. High quality 5mm carbon rod and CNC metal tail scissor control arms are used in rudder control system to improve rudder lockingand control effectiveness.
10. Newly designed rear mounted rudder servo mount, for pleasing aesthetic as well as improving side frame strength and protection to the rudder servo.
11. High speed rated thrust bearings in tail blade grips.
12. High efficiency torque tube drive.
13. Additional radial bearing is added to the one way bearing block to ensure smooth rotation, and eliminate jammed one way bearing.
14. High strength carbon fiber used on tail fins and tail boom supports.
15. New lightweight landing gears.
16. High grade airbrushed fiberglass canopy.
Specifications:
● Length: 1042mm
● Height: 356mm
● Main Blade Length: 520mm
● Main Rotor Diameter: 1188mm
● Tail Rotor Diameter: 254mm
● Motor Drive Gear:16T
● Main Drive Gear:170T
● Autorotation Tail Drive Gear: 131T
● Tail Drive Gear: 34T
● Drive Gear Ratio: 1:10.62:3.85
● Weight(With Motor): 1800g
● Flying Weight: Approx. 2800g
Package Included:
●T-REX 550E V2 3GX Kits Set X1
●Aluminum Tail Boom X1
●RCE-BL70G Brushless ESC x1
●520 Carbon fiber blades X1
●DS610 Digital servoX3 set
●DS620 Digital servo X1
●3GX Flybarless System X1 set NEW!
●600MX Brushless Motor X1 NEW!
●90mm 3K Carbon Fiber Tail Blades X1 Set
●Extra! RAIDEN 22.2V 6S1P 5300mAh 35C Li-Po battery (RD22-53A35)
Futaba or JR or HiTec Radio Combo Included:
●2.4Ghz Futaba T6J or T6EX or T7C or T8FG or T10CG Transmitter or JR XG7 or XG8 or DSX9 or HiTec Aurora
●2.4Ghz Futaba R2006GS or R617FS or R6208SB or R6014HS Receiver / JR RG831B or RD921 Receiver or HiTec Optima
●Rechargable Battey for Transmitter (not included for T6J)
●220V Charger for Transmitter Battery Only. (100V-240V for JR XG8, DSX9 & HiTec Aurora, not included for T6J)
●English Instruction Manual
●Other Accessories (different for each radio model)
| Focus Shot1(Newly designed aerodynamically efficient metal main blade control system) |
Focus Shot2(Dual section battery mount) |
Focus Shot3(CNC main drive gear set ) |
|
|
|
|
| Focus Shot4(New lightweight rigid metal main shaft bearing blocks/Integrated swash anti-rotation guide and gyro mounting platform) |
Focus Shot5(Rear mounted rudder servo mount) |
Focus Shot6(Brand new carbon tail control pushrod assembly) |
|
|
|
|
Focus Shot7(Brand new CNC machined metal tail gear box, with thicker side plates to increase
rigidity. The more streamlined design also allows for simpler disassembly ) |
Focus Shot8(Metal tail control arm with wearproof sleeve) |
Focus Shot9(M0.8 131T Autorotation Tail Drive Gear:34T Tail Gear) |
|
|
|
|
| Focus Shot10(600MX high efficiency, high torque brushless motor) |
Focus Shot11(520 carbon main blades) |
Focus Shot12(DS610 digital servos /DS6 servo horns.) |
|
|
|
|
| Focus Shot13(DS620 Digital servo/RCE-BL70G ESC) |
Focus Shot14(3GX Programmable Flybarless System) |
|
|
|
|
Note:
- The E.B.S.'s lead time is about 7 days to 1.5 weeks. The order will be shipped out 1.5 weeks after order placed and payment received.
- Please check with us for the availability of the radio model before order. Usually Futaba radios are available all the time.
- We will pack the RTF helicopter together with the radio into a hard paper box with a lot of protection. Since the size of the parcel is quite large, we do not offer free DHL upgrade for EMS order of this product.
- This RTF combo can be shipped with air parcel with XP-size. However some countries have restricted the parcel to P-size which is too small to contain the T-Rex 550E RTF. If you are not certain, please email us with your full shipping address. We will get back to you with the suggested shipping method ASAP.
- Balance charger is not included. For high capacity Li-Po battery, we suggest to use the intelligent multifunction charger - e.g. iMAX B5/B6, E605 and etc...
|
Helicopters 
