|
ALIGN T-Rex 500E Combo Kit + 2.4Ghz Futaba 6J/6EX/7C/8FG/10C or JR XG7/XG8/DSX9 Transmitter & Receiver RTF Combo with 22.2V 2850mAh 6S1P 30C Li-Po
(for Intermediate Pliots)
ALL NEW LIGHTWEIGHT T-REX 500E RTF!
Fully Setup by One of the Hong Kong's Champion Pilot!
Ready-to-Fly with 3 Flying Modes: Beginner, Mid-3D and Hard-3D!
Come with 2.4G Futaba or JR Radio System of Your Choice + RAIDEN 22.2V 6S1P 28500mAh 30C Li-Po
What is RC711's Expert Build Service?
Very different from other assembled RTF set, our Expert Build Service (E.B.S.) will send your helicopter to the expert team who consists of the several champion pilots of Hong Kong's F3D R/C helicopter competition. The expert team will setup your helicopter in 3 modes: Beginner, Mid-3D and Hard-3D which you can choose from the soft menu of your transmitter. This provides an upgrade path for you to learn and practice your flying skills in different stages. Your helicopter will be fully tested outdoor to make sure all modes are properly setup, 100% ready to fly and the build time will be about 1.5 week per helicopter.
The Most Reliable Futaba Radios...
With the all new 2.4Ghz Futaba and JR radio systems, you can have more comprehensive setup for your helicopter from normal beginner flying to extreme 3D flying. You won't waste the Futaba/JR transmitter because you can use it later when you upgrade your helicopter to all other popular models. You can even use it on airplanes!
3 Different Flying Modes for Different Levels:
Our 3D Master uses the idle switch functon on the transmitter to pre-define the 3 different flying modes for your helicopter. This make the helicopter ready for all types of pilots, no matter if you are beginner, intermediate or pros! You can change between different fly modes during a single flight without the need to land the helicopters.
- Beginner (normal) – Normal hovering and fly around. Good for beginner to learn and practice.
- Mid-3D (idle1) – Performance flight. Fly around, 3D fly and invert fly. The next step for intermediate pilots.
- Hard-3D (idle2) – Extreme performance. Super reactive 3D fly. Ready for competition!
*Futaba 6EX transmitter only support 2 modes - normal and idle.
Features:
1.Electric power system.
2.Simple and light weight design provides awesome flight performance and extreme 3D capability.
3.Rigid carbon fiber frame design.
4.Beautiful factory painted fiberglass canopy.
5.Rotor head/tail with thrust bearings.
6.Direct-to-swash CCPM linkage.
7.Center of gravity of Battery tray designed close to the rotor head.
8.Tail rotor drive belt system.
9.Fully driven tail auto rotation system.
10.Tail servo boom mount.
** Users must have a certain concept of security to operate the R/C helicopters.
Be sure to read and comply with related safety notes of instruction manual before flying.
Specifications:
●Length:840mm
●Height:310mm
●Main Blade Length:425mm
●Main Rotor Diameter:970mm
●Tail Rotor Diameter:200mm
●Motor Ponion Gear:13T
●Main Drive Gear:162T
●Autorotation Tail Drive Gear:145T
●Tail Drive Gear:31T
●Drive Gear Ratio:1:12.46:4.68
●Weight(w/o power system):980g
●Flying Weight:Approx 1700g
●Color carton:48.3x18.7x9.8cm
●Outer carton:58x50x42cm ,12sets/ctn
Package Included:
●T-REX 500E Kit Set X1 set
●425D carbon fiber blades X1
●RCE-BL70G Brushless ESC X1
(Built-in 5-6V step-less adjustable BEC)
●500MX Brushless motor X1
●Motor ponion gear 13T X1
●DS510 Digital Servo X3
●DS520 Digital Servo X1
●GP780 Head lock gyro X1
●Extra! RAIDEN 22.2V 6S1P 28500mAh 30C Li-Po battery (RD22-28A30)
Futaba or JR or HiTec Radio Combo Included:
●2.4Ghz Futaba T6J or T6EX or T7C or T8FG or T10CG Transmitter or JR XG7 or XG8 or DSX9 or HiTec Aurora
●2.4Ghz Futaba R2006GS or R617FS or R6208SB or R6014HS Receiver / JR RG831B or RD921 Receiver or HiTec Optima
●Rechargable Battey for Transmitter (not included for T6J)
●220V Charger for Transmitter Battery Only. (100V-240V for JR XG8, DSX9 & HiTec Aurora, not included for T6J)
●English Instruction Manual
●Other Accessories (different for each radio model)
| Focus Shot1(High precision main rotor assembly) |
Focus Shot2(High precision bearinged dual link tail pitch slider, with high speed thrust bearinged tail blade grips) |
Focus Shot3(Long wear, surface hardened tail pitch slider sleeve) |
|
|
|
|
| Focus Shot4(New-sturdy lightweight main frame/1.6mm) |
Focus Shot5(Main shaft bearing block) |
Focus Shot6(Fiberglass painted canopy ) |
|
|
|
|
| Focus Shot7(500MX Brushless motor) |
Focus Shot8(RCE-BL70G Electronic speed controller/DS510 Servo)
|
Focus Shot9(DS520 Servo / GP780 Head Lock Gyro) |
|
|
|
|
| Package: |
|
|
| Package: |
|
|
Note:
- The E.B.S.'s lead time is about 7 days. The order will be shipped out 7 days after order placed and payment received.
- Please check with us for the availability of the radio model before order. Usually Futaba radios are available all the time.
- We will pack the RTF helicopter together with the radio into a hard paper box with a lot of protection. Since the size of the parcel is quite large, we do not offer free DHL upgrade for EMS order of this product.
- Balance charger is not included. For high capacity Li-Po battery, we suggest to use the intelligent multifunction charger - e.g. iMAX B5/B6, E605 and etc..
|
Helicopters 
