|
Expert Built Service! ALIGN T-Rex 500E PRO Super Combo + 2.4Ghz Futaba 6J/6EX/7C/8FG/10C or JR XG7/XG8/DSX9 Transmitter & Receiver RTF Combo with 22.2V 2850mAh 6S1P 30C Li-Po
(for Intermediate)
Fully Setup by One of the Hong Kong's Champion Pilot!
Ready-to-Fly with 3 Flying Modes: Beginner, Mid-3D and Hard-3D!
Come with 2.4G Futaba or JR Radio System of Your Choice + RAIDEN 22.2V 6S1P 28500mAh 30C Li-Po
What is RC711's Expert Build Service?
Very different from other assembled RTF set, our Expert Build Service (E.B.S.) will send your helicopter to the expert team who consists of the several champion pilots of Hong Kong's F3D R/C helicopter competition. The expert team will setup your helicopter in 3 modes: Beginner, Mid-3D and Hard-3D which you can choose from the soft menu of your transmitter. This provides an upgrade path for you to learn and practice your flying skills in different stages. Your helicopter will be fully tested outdoor to make sure all modes are properly setup, 100% ready to fly and the build time will be about 1.5 week per helicopter.
The Most Reliable Futaba Radios...
With the all new 2.4Ghz Futaba and JR radio systems, you can have more comprehensive setup for your helicopter from normal beginner flying to extreme 3D flying. You won't waste the Futaba/JR transmitter because you can use it later when you upgrade your helicopter to all other popular models. You can even use it on airplanes!
3 Different Flying Modes for Different Levels:
Our 3D Master uses the idle switch functon on the transmitter to pre-define the 3 different flying modes for your helicopter. This make the helicopter ready for all types of pilots, no matter if you are beginner, intermediate or pros! You can change between different fly modes during a single flight without the need to land the helicopters.
- Beginner (normal) – Normal hovering and fly around. Good for beginner to learn and practice.
- Mid-3D (idle1) – Performance flight. Fly around, 3D fly and invert fly. The next step for intermediate pilots.
- Hard-3D (idle2) – Extreme performance. Super reactive 3D fly. Ready for competition!
*Futaba 6EX transmitter only support 2 modes - normal and idle.
Preface:
1.Following the design and manufacturing excellence of Align, T-Rex 500E Pro is a new generation of 500 class helicopter with exclusive innovations.
2.Utilizes new style 500 rotor head, with 3 sets of positive/negative deltas and numerous Bell/Hiller mixing ratios to provide both stability and agility, improving the stability and controllability of the helicopter. Composite technology is used throughout the side frames which cleverly strengthen the weak areas, and eliminated servo mounting nuts to simplify maintenance at the same time. Removable gyro mounting platform and receiver mount are more rigid and ergonomically friendly. Rudder servo is mounted inside the frame for more central CG point to improve 3D performance, as well as minimize crash damage to the servo. Superior quality tail gear box, thicker stronger side plates around tail drive crown gear. Newly designed dual bearinged tail blade grips for zero slop rudder control precision and ultimate tail locking performance. At the heart of the helicopter, the high efficiency Align MX series motor provide continuous power.
3.T-Rex 500E Pro features high stability, excellent gust resistance, superior control feel, and being 500 is just the right size/price, it is the ultimate choice for enthusiasts.
Features:
1.New style 500 rotor head, with 3 sets of positive/negative deltas and numerous Bell/Hiller mixing ratios.
2.Unique carbon composite technology which effectively strengthen the weak areas and simplify electronics installation.
3.Servos can be mounted directly onto frame without mounting nuts.
4.Rear in-frame rudder servo mount design for centralize 3G for best 3D performance.
5.Equipped with MX series high efficiency brushless motor, with heatsink style casing and embedded fan to dramatically improve cooling and increase power output.
6.Unique fast release gyro and receiver mount design for fast removal and sturdy attachment.
7.Uses high precision slant tooth (helical) main gear, with higher load sustainability and lower noise output.
8.Brand new tail gear box with higher material quality and easy maintenance.
9.Newly designed dual bearinged tail blade grips for zero slop rudder control precision and ultimate tail locking performance.
10.Highly efficient shaft driven tail system which effectively reduce power loss found on belt driven system, and at the same time increase performance during flight.
11.Brand new 4mm carbon rudder control rod and metal rudder pitch bell crank to further improve the rudder locking effect and controllability.
12.New style battery mounting platform to strengthen frame as well as provide mount for electronic speed controller.
13.New style lower CG landing gear.
14.Newly styled aerodynamically canopy for the ultimate fit, making the helicopter stand out.
Specifications:
● Length: 868mm
● Height: 308mm
● Width: 161mm
● Main Blade Length: 425mm
● Main Rotor Diameter: 978mm
● Tail Rotor Diameter: 206mm
● Motor Drive Gear:12T
● Main Drive Gear:134T
● Autorotation Tail Drive Gear: 145T
● Tail Drive Gear: 36T
● Drive Gear Ratio: 1:11.17:4.03
● Weight(With Motor): 1295g
Package Included:
●T-REX 500E PRO RTF Set x 1 set (100% pre-assembled)
●425 carbon fiber blades X 1 (Installed)
●RCE-BL70G 70A Brushless ESC X 1 (Installed)
(Built-in 5-6V step-less adjustable BEC)
●500MX Brushless motor(1600KV)X1 (Installed) NEW!
●Motor ponion gear 13TX1 (Installed)
●DS510M ServoX3 (Installed) NEW!
●DS520 Digital Servo X1 (Installed)
●GP900 Head lock gyro X1 (Installed) NEW!
●Extra! RAIDEN 22.2V 6S1P 28500mAh 30C Li-Po battery (RD22-28A30)
Futaba or JR or HiTec Radio Combo Included:
●2.4Ghz Futaba T6J or T6EX or T7C or T8FG or T10CG Transmitter or JR XG7 or XG8 or DSX9 or HiTec Aurora
●2.4Ghz Futaba R2006GS or R617FS or R6208SB or R6014HS Receiver / JR RG831B or RD921 Receiver or HiTec Optima
●Rechargable Battey for Transmitter (not included for T6J)
●220V Charger for Transmitter Battery Only. (100V-240V for JR XG8, DSX9 & HiTec Aurora, not included for T6J)
●English Instruction Manual
●Other Accessories (different for each radio model)
| Focus Shot1(New style 500 rotor head, with 3 sets of positive/negative deltas and numerous Bell/Hiller mixing ratios ) |
Focus Shot2(Newly designed electronic equipments and ESC mount ) |
Focus Shot3(High precision bearing mixing arms) |
|
|
|
|
| Focus Shot4(Unique carbon composite technology which effectively strengthen the weak areas and simplify electronics installation ) |
Focus Shot5(Newly Metal Anti Rotation Bracket) |
Focus Shot6(Newly designed Gyro and Receiver mount) |
|
|
|
|
| Focus Shot7(Brand new carbon tail control pushrod assembly ) |
Focus Shot8(High efficiency shaft tail drive system ) |
Focus Shot9(Metal tail control arm with wearproof sleeve ) |
|
|
|
|
| Focus Shot10(Newly styled aerodynamically canopy) |
Focus Shot11(500MX Brushless Motor) |
Focus Shot12(425 Carbon fiber blades ) |
|
|
|
|
| Focus Shot13(DS510M standard servo ) |
Focus Shot14(DS520 standard servo and RCE-BL70G Brushless ESC) |
Focus Shot15(GP900 gyro) |
|
|
|
|
Note:
- The E.B.S.'s lead time is about 7 days. The order will be shipped out 7 days after order placed and payment received.
- Please check with us for the availability of the radio model before order. Usually Futaba radios are available all the time.
- We will pack the RTF helicopter together with the radio into a hard paper box with a lot of protection. Since the size of the parcel is quite large, we do not offer free DHL upgrade for EMS order of this product.
- Balance charger is not included. For high capacity Li-Po battery, we suggest to use the intelligent multifunction charger - e.g. iMAX B5/B6, E605 and etc...
|
Helicopters 
