|
Expert Built Service! ALIGN T-Rex 250SE Super Combo + 2.4Ghz Futaba 6J/6EX/7C/8FG/10C or JR DSX7/9 or HiTec Aurora Transmitter & Receiver RTF Combo with RAIDEN 900mAh 20C LiPo
(for Intermediate+)
Fully Setup by One of the Hong Kong's Champion Pilot!
Ready-to-Fly with 3 Flying Modes: Beginner, Mid-3D and Hard-3D!
Come with 2.4G Futaba or JR Radio System of Your Choice + RAIDEN 900mAh Li-Po Battery + Balance Charger
What is RC711's Expert Build Service?
Very different from other assembled RTF set, our Expert Build Service (E.B.S.) will send your helicopter to the expert team who consists of the several champion pilots of Hong Kong's F3D R/C helicopter competition. The expert team will setup your helicopter in 3 modes: Beginner, Mid-3D and Hard-3D which you can choose from the soft menu of your transmitter. This provides an upgrade path for you to learn and practice your flying skills in different stages. Your helicopter will be fully tested outdoor to make sure all modes are properly setup, 100% ready to fly and the build time will be about 1.5 week per helicopter.
The Most Reliable Futaba/JR /Hitec Radios...
With the all new 2.4Ghz Futaba and JR radio systems, you can have more comprehensive setup for your helicopter from normal beginner flying to extreme 3D flying. You won't waste the Futaba/JR transmitter because you can use it later when you upgrade your helicopter to all other popular models. You can even use it on airplanes!
3 Different Flying Modes for Different Levels:
Our 3D Master uses the idle switch functon on the transmitter to pre-define the 3 different flying modes for your helicopter. This make the helicopter ready for all types of pilots, no matter if you are beginner, intermediate or pros! You can change between different fly modes during a single flight without the need to land the helicopters.
- Beginner (normal) – Normal hovering and fly around. Good for beginner to learn and practice.
- Mid-3D (idle1) – Performance flight. Fly around, 3D fly and invert fly. The next step for intermediate pilots.
- Hard-3D (idle2) – Extreme performance. Super reactive 3D fly. Ready for competition!
*Futaba 6EX transmitter only support 2 modes - normal and idle.
Features:
●Newly designed main rotor head set enhanced the strength of the metal part. Utilization of high precision bearings resulting in improved stability and agility flying characteristics. Newly designed metal control lever and CCPM metal swashplate improved 3D performance.
●New anti-rotation guide, with the strengthen frame base enhanced the structure strength for the main frame.
●Newly designed servo screw retainers to simplify installation and maintenance.
●Strengthen landing skids enhanced its durability. The added skidproof screw holes make easier assembly.
●Single unit tail belt unit with the new counter weighted tail blade grips make it easier assembly and improving rudder efficiency.
●Streamlined design canopy, with colorful painting to make effectively contrast in the air.
Specifications:
●Length:430mm
●Height:163mm
●Main Blade Length:205mm
●Main Rotor Diameter:460mm
●Tail Rotor Diameter:108mm
●Motor Ponion Gear:15T
●Main Drive Gear:120T
●Tail Drive Gear:28T
●Drive Gear Ratio:1:8:4.28
●Weight(w/o power system):148g
●Flying Weight:Approx 340g
●Color carton:27.3x10x6.6cm
●Outer carton:56x31x28cm ,24sets/ctn
Package Included:
●T-REX 250 Kit SetX1 set (100% RTF)
●200 Main bladesX1set
●205D Carbon main bladesX1set (Installed)
●RCE-BL15X 15A Brushless ESCX1 (Installed)
(Build-in 5~6V adjustable BEC)
●RCM-BL250SP Brushless motor(3400KV)X1 (Installed)
●Motor ponion gear 15TX1 (Installed)
●GP780 Head Lock GyroX1 NEW! (Installed)
●DS420 Digital servoX1 (Installed)
●DS410 Digital servoX3 (Installed)
●37 Tail bladeX1set (Installed)
●40 Tail bladeX1set
●ClipX1
●#00 Philips screw driverX1
●0.9mm Hex head wrenchX1
●1.3 Hexagon screw driverX1
●Dial pitch gauge padX1
●Extra! RAIDEN 11.1V 900mAh 25C Li-Po Battery (RD11-09A20)
●Extra! iMAX Compact Charger B3 for Li-Polymer Battery (IMAXRC-B3)
Futaba or JR or HiTec Radio Combo Included:
●2.4Ghz Futaba T6J or T6EX or T7C or T8FG or T10CG Transmitter or JR DSX7 / DSX9 or HiTec Aurora
●2.4Ghz Futaba R2006GS or R617FS or R6208SB or R6014HS Receiver / JR RD721 or RD921 Receiver or HiTec Optima
●Rechargable Battey for Transmitter (not included for T6J)
●220V Charger for Transmitter Battery Only. (100V-240V for JR DSX9 & HiTec Aurora, not included for T6J)
●English Instruction Manual
●Other Accessories (different for each radio model)
| Focus Shot1(Newly designed main rotor head set enhanced the strength of the metal part.) |
Focus Shot2(Newly designed metal control lever and CCPM metal swashplate improved 3D performance.) |
Focus Shot3(Newly designed servo screw retainers to simplify installation and maintenance.) |
|
|
|
|
| Focus Shot4(New anti-rotation guide, with the strengthen frame base enhanced the structure strength for the main frame.) |
Focus Shot5(Single unit tail belt unit with the new counter weighted tail blade grips.) |
Focus Shot6(Strengthen landing skids enhanced its durability.The added skidproof screw holes make easier assembly.) |
|
|
|
|
| Focus Shot: |
|
|
|
|
| |
|
|
Note:
- The E.B.S.'s lead time is about 1.5 weeks. The order will be shipped out 1.5 weeks after order placed and payment received.
- Please check with us for the availability of the radio model before order. Usually Futaba radios are available all the time.
|
Helicopters 
